{"id":1031,"date":"2017-05-30T07:41:23","date_gmt":"2017-05-30T12:41:23","guid":{"rendered":"http:\/\/a2c2.meca.polymtl.ca\/?page_id=1031"},"modified":"2017-05-30T09:58:02","modified_gmt":"2017-05-30T14:58:02","slug":"publications-2","status":"publish","type":"page","link":"https:\/\/a2c2.meca.polymtl.ca\/?page_id=1031","title":{"rendered":"Publications 2"},"content":{"rendered":"

RESEARCH CONTRIBUTIONS <\/strong><\/p>\n

\u00a0<\/strong><\/p>\n

Books:<\/em><\/strong><\/p>\n

\u00a0<\/em><\/strong><\/p>\n

    \n
  1. \u201cComposite reinforcements for optimum performance<\/em>\u201d, Edited by P. Boisse, Chapter 22, \u201cFlow modeling in composite reinforcements<\/u><\/em>\u201d, ISBN 1845699653, 2011.<\/li>\n
  2. \u201cMultifunctional composites<\/em>\u201d, Edited by E. J. Barbero, Chapter 5, \u201cAcoustic and vibration damping of composite structures<\/u><\/em>\u201d, ISBN 151680452X, 2015.<\/li>\n<\/ol>\n

    \n

    \u00a0<\/strong><\/p>\n

    \u00a0<\/strong><\/p>\n

    Articles published or accepted in refereed journals<\/em><\/strong> (51 since 2003):<\/strong><\/em><\/p>\n

    \n

      \n
    1. PUPIN, C., ROSS, A., DUBOIS, C., REITSCH, J.-C., RUIZ, E., \u201cPredicting porosity formation in phenolic resins for RTM manufacturing: The porosity map, Composites Part A: Applied Science and Manufacturing\u201d, Volume 100, September 2017, Pages 294-304,<\/li>\n
    2. PUPIN, C., ROSS, A., DUBOIS, C., REITSCH, J.-C., VERNET, N., RUIZ, E., \u201cFormation and suppression of volatile-induced porosities in an RTM epoxy resin\u201d, http:\/\/dx.doi.org\/10.1016\/j.compositesa.2016.12.006, 2016. [NSERC, 30%]<\/li>\n
    3. Renaud, J., VERNET, N., RUIZ, E., LABERGE-LEBEL, L., \u201cCreep compaction behavior of 3D carbon interlock fabrics with lubrication and temperature<\/em>\u201d, Composites Part A<\/u>, 86: 87-96, 2016. [NSERC, 30%]<\/li>\n
    4. FOTSING, E. R., LECLERC, C., SOLA, M., ROSS, A., RUIZ, E., \u201cMechanical properties of composite sandwich structures with core or face sheet discontinuities<\/em>\u201d, Composites part B<\/u>, doi:10.1016\/j.compositesb.2015.10.037. [NSERC, FQRNT, 30%]<\/li>\n
    5. GASCON, Ll., Garc\u00eda, J. A., LEBEL, F., RUIZ, E., TROCHU, F., \u201cNumerical prediction of saturation in dual scale fibrous reinforcements during Liquid Composite Molding<\/em>\u201d, Composites Part A<\/u>, 77: 275-284, 2015.<\/li>\n
    6. GASCON, Ll., Garc\u00eda, J. A., LEBEL, F., RUIZ, E., TROCHU, F., \u201cA two-phase flow model to simulate mold filling and saturation in Resin Transfer Molding<\/em>\u201d, J. of Material Forming<\/u>, 9(2), 229-239, 2015.<\/li>\n
    7. Favre, a., Fotsing, R., Levesque, M., RUIZ, E., \u201cComparative study of fiber-reinforced elastomer composites subjected to accelerated ageing in water<\/em>\u201d, of Elastomers and Plastics<\/u>, DOI: 10.1177\/0095244314534102, 2014.<\/li>\n
    8. ravey, c., RUIZ, E., TROCHU, F., \u201cDetermination of the Optimal Impregnation Velocity in Resin Transfer Moulding by Capillary Rise Experiments and Infrared Thermography<\/em>\u201d, Composite Sci. and Tech.<\/u>, 99, 96\u2013102, 2014.<\/li>\n
    9. VERNET, N., RUIZ, E., et. \u201cExperimental determination of the permeability of engineering textiles: Benchmark II<\/em>\u201d, Composites Part A<\/u>, 61: 172\u2013184, 2014.<\/li>\n
    10. FOTSING, E. R., SOLA, M., ROSS, A., RUIZ, E., \u201cDynamic characterization of viscoelastic materials used in composite structures<\/em>\u201d, Journal of Composite materials<\/u>, 48:30, 3815-3825, 2014. [NSERC, FQRNT, 25%]<\/li>\n
    11. LEBEL, F., FANAEI, A., RUIZ, E., TROCHU, F., \u201cPrediction of optimal flow front velocity to minimize void formation in dual scale fibrous reinforcements<\/em>\u201d, Journal of Material Forming<\/u>, 7:1, 93\u2013116, 2014. [NSERC, Canada, 30%]<\/li>\n
    12. FOTSING, E. R., ROSS, A., RUIZ, E., \u201cCharacterization of surface defects on composite sandwich materials based on deflectrometry<\/em>\u201d, NDT&E International<\/u>, 62, 29-39, 2014. [NSERC, FQRNT, 30%]<\/li>\n
    13. FOTSING, E. R., SOLA, M., ROSS, A., RUIZ, E., \u201cLightweight viscoelastic damping treatment of composite sandwich beams: Experimental analysis<\/em>\u201d, Journal of Composite materials<\/u>, 47(12), 1501-1511, 2013. [NSERC, FQRNT, 30%]<\/li>\n
    14. Billotte, C., MORIN BERNARD, F., RUIZ, E., \u201cChemical Shrinkage and Thermomechanical Characterization of an Epoxy Resin During Cure by a Novel In-Situ Measurement Method<\/em>\u201d, European Polymer J.<\/u>, 2013, http:\/\/dx.doi.org\/10.1016\/j.eurpolymj.2013.07.013. [NSERC, 50%]<\/li>\n
    15. GUTIERREZ, J., RUIZ, E., TROCHU, F., \u201cExploring the behavior of glass fiber reinforcements under vibration-assisted compaction<\/em>\u201d, The Journal of the Textile Institute<\/u>, 2013, http:\/\/dx.doi.org\/10.1080\/00405000.2013.770197. [NSERC, 40%]<\/li>\n
    16. GUTIERREZ, J., RUIZ, E., TROCHU, F., \u201cHigh Frequency Vibrations on the Compaction of Dry Fibrous Reinforcements\u201d, Advanced Composite Materials<\/u>, vol. 22, no. 1, pp. 13-27, 2013.<\/li>\n
    17. PALARDY, P. HUBERT, E. RUIZ, M. HAIDER, L. LESSARD (2012). Numerical Simulations for Class A Surface Finish in Resin Transfer Moulding Process. Composites Part B-Engineering, 43(2), p. 819-824.<\/li>\n
    18. LEBEL, F., FANAEI, A., RUIZ, E., TROCHU, F., \u201cExperimental Characterization by Fluorescence of Capillary Flows in Dual Scale Engineering Fabrics<\/em>\u201d, Textile Research Journal<\/u>, 83:15, 1634\u20131659, 2012. [NSERC, GM Canada, 30%]<\/li>\n
    19. FRANCUCCI, G., V\u00c1ZQUEZ, A., RUIZ, E., RODR\u00cdGUEZ, E., \u201cKey factors affecting processing of natural fiber composites<\/em>\u201d, Plastics Research Online<\/u>, 10.1002\/spepro.004524, 2012.<\/li>\n
    20. LEBEL, F., FANAEI, A., RUIZ, E., TROCHU, F., \u201cPrediction of Optimal Flow Front Velocity to Minimize Void Formation in Dual Scale Fibrous Reinforcements<\/em>\u201d, Journal Mater Form<\/u>, 7: 93\u2013116, 2014. [NSERC, GM Canada, 30%]<\/li>\n
    21. LEBEL, F., FANAEI, A., RUIZ, E., TROCHU, F., \u201cExperimental Characterization by Fluorescence Visualization of Capillary Flows in the Fiber Tows of Engineering Fabrics<\/em>\u201d, Open Journal of Inorganic Non-metallic Materials<\/u> 2(3): 25-35, DOI:10.4236\/ojinm.2012.23004, 2012. [NSERC, GM Canada, 30%]<\/li>\n
    22. CAUSSE, P., RUIZ, E., TROCHU, F., \u201cInfluence of Preforming on the Quality of Curved Composite Parts Manufactured by Flexible Injection<\/em>\u201d, J Mater Form<\/u>, DOI 10.1007\/s12289-012-1090-y, 2012. [NSERC, GM Canada, 30%]<\/li>\n
    23. FRANCUCCI, G., V\u00c1ZQUEZ, A., RODR\u00cdGUEZ, E., RUIZ, E., \u201cCapillarity Effect in Vacuum Assisted Resin Transfer Molding with Natural Fibers<\/em>\u201d, Polymer Composites<\/u>, DOI 10.1002\/pc.22290, 2012.<\/li>\n
    24. Causse, P., RUIZ, E., TROCHU, F., \u201cSpring-in Behavior of Curved Composites Manufactured by Flexible Injection<\/em>\u201d, Composites Part A<\/u>, http:\/\/dx.doi.org\/10.1016\/j.compositesa.2012.06.010<\/a>. [NSERC, GM Canada, 35%]<\/li>\n
    25. LEBEL, F., FANAEI, A., RUIZ, E., TROCHU, F., \u201cExperimental Characterization by Fluorescence of Capillary Flows in the Fiber Tows of Engineering Fabrics<\/em>\u201d, of Inorganic Non-metallic Materials<\/u>, 2012, 2, 25-45.<\/li>\n
    26. FOTSING, E.R., SOLA, M., ROSS, A., RUIZ, E., \u201cLightweight Viscoelastic Damping Treatment of Composite Sandwich Beams: Experimental Analysis<\/em>\u201d, of Composite Materials<\/u>, DOI: 10.1177\/0021998312449027. [NSERC, FQRNT, 30%]<\/li>\n
    27. Arbter, J.M. Beraud, C. Binetruy, L. Bizet, J. Br\u00e9ard, S. Comas-Cardona, C. Demaria, A. Endruweit, P. Ermanni, F. Gommer, S. Hasanovic, P. Henrat, F. Klunker, B. Laine, S. Lavanchy, S.V. Lomov, A. Long, V. Michaud, G. Morren, E. Ruiz, H. Sol, F. Trochu, B. Verleye, M. Wietgrefe, W. Wui, G. Ziegmann, \u201cExperimental determination of the permeability of textiles: A benchmark exercise<\/em>\u201d, Composites Part A<\/u>, 42 (2011) 1157\u20131168.<\/li>\n
    28. FOTSING, E. R., MIRON, Y., ROSS, A., RUIZ, E., \u201cBonding Analysis of Carbon\/Epoxy Composites with Viscoelastic Acrylic Adhesive<\/em>\u201d, Composites Part B<\/u>, http:\/\/dx.doi.org\/10.1016\/j.compositesb.2012.03.009<\/a>. [NSERC, FQRNT, 30%]<\/li>\n
    29. Causse, P., RUIZ, E., TROCHU, F., \u201cInfluence of preforming on the quality of curved composite parts manufactured by flexible injection<\/em>\u201d, International Journal of Material Forming<\/u>, DOI 10.1007\/s12289-012-1090-y. [NSERC, GM Canada, 35%]<\/li>\n
    30. Bensadoun, F., BICKERTON, S., RUIZ, E., Billotte, C., KCHIT, N., TROCHU, F., \u201cA Study of Nanoclay Reinforcement of Biocomposites Made by Liquid Composite Molding<\/em>\u201d, International Journal of Polymer Science<\/u>, DOI: 10.1155\/2011\/964193, 2011. [NSERC, 30%]<\/li>\n
    31. Bensadoun, F., KCHIT, N., Billotte, C., TROCHU, F., RUIZ, E., \u201cA Comparative Study of Dispersion Techniques for Nanocomposite Made with Nanoclays and an Unsaturated Polyester Resin<\/em>\u201d, Journal of Nanomaterials<\/u>, DOI: 10.1155\/2011\/406087, 2011. [NSERC, 40%]<\/li>\n
    32. Causse, P., RUIZ, E., TROCHU, F., \u201cExperimental study of flexible injection to manufacture parts of strong curvature<\/em>\u201d, Polymer Composites<\/u>, DOI: 10.1002\/pc.21096, 2011. [NSERC, GM Canada, 35%]<\/li>\n
    33. Garc\u00eda J. A., GASCON, Ll., CHINESTA, F., RUIZ, E., TROCHU, F., \u201cAn Efficient Solver of the Saturation Equation in Liquid Composite Molding Processes<\/em>\u201d, International Journal of Material Forming<\/u>, DOI 10.1007\/s12289-010-0681-8, 2010.<\/li>\n
    34. ACHIM, V., RUIZ, E., \u201cGuiding Selection for Reduced Process Development Time in RTM\u201d<\/em>, International Journal of Material Forming<\/u>, DOI 10.1007\/s12289-009-0630-6, 2009. [NSERC, 40%]<\/li>\n
    35. Leclerc, J.-S., RUIZ, E., \u201cPorosity Reduction using Optimized Flow Velocity in Resin Transfer Molding<\/em>\u201d, Composites Part A \u2013 Applied Science & Manufacturing<\/u>, 39: 1859-1868, 2008. [NSERC, FQRNT, GM Canada, 40%]<\/li>\n
    36. RUIZ, E., BILLOTTE, C., \u201cPredicting the Cure of Thermosetting Polymers: The Iso-conversion map<\/em>\u201d, Polymer Composites<\/u>, 10.1002\/pc.20710, 2008. [NSERC, FQRNT, GM Canada, 80%]<\/li>\n
    37. RUIZ, E., ACHIM, V., TROCHU, F., \u201cCoupled non-conforming finite element and finite difference approximation based on laminate extrapolation to simulate liquid composite molding processes. Part I: Isothermal Flow<\/em>\u201d, and Eng. of Composite Materials<\/u>, 14(2): 85-112, 2007 [Auto21, 80%]<\/li>\n
    38. RUIZ, E., TROCHU, F., \u201cCoupled non-conforming finite element and finite difference approximation based on laminate extrapolation to simulate liquid composite molding processes. Part II: Non-isothermal filling and curing<\/em>\u201d, Science and Engineering of Composite Materials<\/u>, 14(2): 113-144, 2007 [Auto21, NSERC, FQRNT, 90%].<\/li>\n
    39. Demaria, RUIZ, E., TROCHU, F., \u201cIn-plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injections. Part II: Prediction model and numerical simulations\u201d<\/em>, Polymer Composites<\/u>, 28 (6) 812-827. [NSERC, FQRNT, 30%]<\/li>\n
    40. Demaria, RUIZ, E., TROCHU, F., \u201cIn-plane anisotropic permeability characterization of deformed woven fabrics by unidirectional injections. Part I: Experimental results\u201d<\/em>, Polymer Composites<\/u>, 28 (6) 797-811, 2007. [NSERC, FQRNT, 30%].<\/li>\n
    41. RUIZ, E., TROCHU, F., \u201cMulti-Criteria Thermal Optimization in Liquid Composite Molding to Reduce Processing Stresses and Cycle Time<\/em>\u201d, Composites Part A<\/u>, Special Issue FPCM-7, 37:6. 913-924, 2006 [Auto21, NSERC, FQRNT, 90%].<\/li>\n
    42. TROCHU, F., RUIZ, E., ACHIM, V., SOUKANE, S., \u201cAdvanced Numerical Simulation of Liquid Composite Molding <\/em>for Process Analysis and Optimization<\/em>\u201d,<\/em> Composites Part A<\/u>, Special Issue FPCM-7, 37:6 SPEC ISS. 890-902, 2006 [NSERC, FQRNT, 40%].<\/li>\n
    43. RUIZ, E., ACHIM, V., SOUKANE, S., TROCHU, F., BREARD, J., \u201cOptimization of injection flow rate to minimize micro\/macro voids Formation in Resin transfer molded composites<\/em>\u201d, of Composite Sci. and Tech.<\/u>, 66:3-4. 475-486, 2006 [NSERC, FQRNT, 70%].<\/li>\n
    44. RUIZ, E., Demaria, TROCHU, F., \u201cPolyPer, a freeware for preform permeability characterization<\/em>\u201d, JEC Composites<\/u>, 17:70, 2005 [Auto2, 50%].<\/li>\n
    45. SOUKANE, S., RUIZ, E., TROCHU, F., \u201cA Novel Approach to Reduce Calculation Time during Simulations of Resin Transfer Molding<\/em>\u201d, European Finite Element Revue<\/u>, 14(6-7): 819-840, 2005.<\/li>\n
    46. RUIZ, E., TROCHU, F., \u201cComprehensive thermal optimization of liquid composite molding to reduce time and processing stresses<\/em>\u201d, Polymer Composites<\/u>, 26(2): 209-230, 2005. [Auto21, 90%]<\/li>\n
    47. RUIZ, E., TROCHU, F., \u201cNumerical analysis of cure temperature and internal stresses in thin and thick RTM parts<\/em>\u201d, Composites Part A<\/u>, 36(6): 806-826, 2005. [Auto21, 90%]<\/li>\n
    48. RUIZ, E., TROCHU, F., \u201cThermo-mechanical properties during cure of glass-polyester RTM composites: elastic and viscoelastic modeling<\/em>\u201d, of Composite Materials<\/u>, 39(10): 881-916, 2005. [NSERC, FQRNT, 90%]<\/li>\n
    49. RUIZ, E., ACHIM, V., SOUKANE, S., TROCHU, F., \u201cNumerical Simulation of Liquid Composite Molding\u201d<\/em>, JEC Composites<\/u>, 8:147-149, 2004. [NSERC, FQRNT, 50%].<\/li>\n
    50. B\u00e9chet, E., RUIZ, E., , Trochu, F., Cuilli\u00e8RE, J.-C., \u201cRe-meshing Algorithms Applied to Mould Filling Simulations in Resin Transfer Moulding\u201d<\/em>, J. of Reinf. Plast. & Comp<\/u>., 23(1): 17-36, 2004. [NSERC, FQRNT, 20%].<\/li>\n
    51. RUIZ, E., TROCHU, F., GAUVIN, R., \u201cInternal Stresses and Warpage in Thin Composite Parts Manufactured by RTM<\/em>\u201d, Advanced Composite Letters<\/u>, 13(1): 49-57, 2004. [NSERC, FQRNT, 80%]<\/li>\n
    52. RUIZ, E., TROCHU, F., \u201cState of the art revue of numerical simulation of liquid composite molding processes<\/em>\u201d, Recent Research Developments in Material Science & Eng.<\/u>, 2:217-244, 2003.<\/li>\n
    53. B\u00e9chet, E., RUIZ, E., Trochu, F., Cuilli\u00c8RE, J.-C., \u201cAdaptive Mesh Generation for Mould Filling Problems in Resin Transfer Moulding<\/em>\u201d, Composites Part A \u2013 Applied Science & Manufacturing<\/u>, 34(9): 813-834, 2003. [NSERC, FQRNT, 15%]<\/li>\n<\/ol>\n

      \n

        \n
      1. b) Articles submitted to scientific journals with peer review:<\/em><\/strong><\/li>\n<\/ol>\n

        \n

          \n
        1. ACHIM, V., RUIZ, E., \u201cReview of Numerical Filling Algorithms used in Resin Transfer Molding Simulation and New Hybrid Formulation\u201d<\/em>, Composites Part A<\/u>, submitted Jun 2009. [NSERC, 35%]<\/li>\n<\/ol>\n

          \u00a0<\/em><\/p>\n

          \n

          Other refereed contributions. Conferences with review committee (88 since 2000):<\/strong><\/p>\n

          \n

          \n

            \n
          1. Renaud, J., RUIZ, E., LABERGE-LEBEL, L., \u201cPreforming of 3D carbon interlock fabrics for the manufacturing of composite parts with the flexible injection process<\/em>\u201d, proceedings of SAMPE Long Beach Conference<\/u>. Long Beach, California, May 23-26, 2016.<\/li>\n
          2. RUIZ, E., COURTEAU-GODMAIRE, H., FOTSING, R., BILLOTTE, C., LEVESQUE, M., \u201cExperimental and Numerical Analysis of Defects in Composite Panels Used in Business Aircrafts Interior<\/em>\u201d, 8th<\/sup> International Conference Time of Polymers & Composites<\/u>, Ischia, Italy, June 19 to 23, 2016.<\/li>\n
          3. Courtois, A., RUIZ, E., HIRSEKORN, M., MARCIN, L., LEVESQUE, M., \u201cViscoelastic Behavior of an Epoxy Resin During Cure: Characterization and Modeling<\/em>\u201d, Mechanics of Time Dependent Materials Conference (MTDMC 2016)<\/u>, Paris, France, May 17 to 20, 2016.<\/li>\n
          4. Renaud, J., RUIZ, E., TROCHU, F., LABERGE-LEBEL, L., \u201cStudy of the creep compaction behavior of a 3D carbon interlock fabric<\/em>\u201d, 12th International Conference on Textile Composites (TexComp-12)<\/u>, Raleigh, USA, May 26-29, 2015.<\/li>\n
          5. PUPIN, C., ROSS, A., DAUCHIER, M., VERNET, N., DAMBRINE, B., \u201cPorosity Control by Process Parameters<\/em>\u201d, 20th<\/sup> International Conference on Composite Materials (ICCM-20)<\/u>, Copenhagen, July 19 to 24, 2015.<\/li>\n
          6. Courteau-Godmaire, H., causse, P., Fotsing, R., RUIZ, E., \u201cNumerical modeling of resin shrinkage around insert in composite sandwich panels<\/em>\u201d, 20th<\/sup> International Conference on Composite Materials (ICCM-20)<\/u>, Copenhagen, July 19 to 24, 2015.<\/li>\n
          7. RUIZ, E., \u201cComposites for the aerospace industry : from fibers to structures<\/em>\u201d, 6th International Conference on Science and Technology of Composite Materials (COMAT2015)<\/u>, Buenos Aires, Argentina, May 5 to 7, 2015.<\/li>\n
          8. BENAVENTE M., CAUSSE, P., VERNET, N., GODON, T., RUIZ, E., \u201cResidual stresses in 3D interlock composites: Characterization and simulation\u2019 conference,<\/em>\u201d, 6th International Conference on Science and Technology of Composite Materials (COMAT2015)<\/u>, Buenos Aires, Argentina, May 5 to 7, 2015.<\/li>\n
          9. Garc\u00eda J. A., GASCON, Ll., RUIZ, E., TROCHU, F., \u201cModeling Hysteresis in Liquid Composite Mold Filling Processes with Void Formation<\/em>\u201d, 12th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-12)<\/u>, Enschede, The Nederland, July 14 to 16, 2014.<\/li>\n
          10. FAVRE, A., FOTSING, R., LEVESQUE, M., RUIZ, E., \u201cRubber Fiber-Reinforced Composite Materials for Hydraulic Turbine<\/em>\u201d, Advances in Hydroelectric Turbine Manufacturing and Repair<\/u>, Montr\u00e9al, Canada, 27-31 October, 2013.<\/li>\n
          11. RUIZ, E., et. Al. \u201cResults of the second Permeability Benchmark Exercise<\/em>\u201d, 19th<\/sup> International Conference on Composite Materials (ICCM-19)<\/u>, Montr\u00e9al, Canada, July 28 to August 2, 2013.<\/li>\n
          12. Fotsing, R., Sola, M., Ross, A., RUIZ, E., \u201cMechanical Properties of composite sandwich structures with core or face sheet discontinuities<\/em>\u201d, 19th<\/sup> International Conference on Composite Materials (ICCM-19)<\/u>, Montr\u00e9al, Canada, July 28 to August 2, 2013.<\/li>\n
          13. charette, e., Billotte, C., Fotsing, R., GRENIER, D., RUIZ, E., \u201cEffect of humidity and temperature on the curing and aging of a room temperature epoxy adhesive<\/em>\u201d, 19th<\/sup> International Conference on Composite Materials (ICCM-19)<\/u>, Montr\u00e9al, Canada, July 28 to August 2, 2013.<\/li>\n
          14. Billotte, C., RUIZ, E., \u201cChemical shrinkage and thermomechanical characterization of different resin systems during cure by a novel in situ measurement method<\/em>\u201d, 19th<\/sup> International Conference on Composite Materials (ICCM-19)<\/u>, Montr\u00e9al, Canada, July 28 to August 2, 2013.<\/li>\n
          15. Favre, a., Fotsing, R., Levesque, M., RUIZ, E., \u201cComparative study of elastomer-fiber-reinforced composites subjected to accelerated ageing in water<\/em>\u201d, 19th<\/sup> International Conference on Composite Materials (ICCM-19)<\/u>, Montr\u00e9al, Canada, July 28 to August 2, 2013.<\/li>\n
          16. PUPIN, C., LOISELLE-SHEBIB, V., ROSS, A., DAUCHIER, M., DAMBRINE, B., GODON, T., RUIZ, E., \u201cPorosity elimination related to volatiles from the polymerization in RTM processing<\/em>\u201d, 19th<\/sup> International Conference on Composite Materials (ICCM-19)<\/u>, Montr\u00e9al, Canada, July 28 to August 2, 2013.<\/li>\n
          17. ravey, c., LEBEL, F., RUIZ, E., TROCHU, F., \u201cVoids minimization and optimization of injection velocity during RTM processes for glass fibers reinforcements<\/em>\u201d, 19th<\/sup> International Conference on Composite Materials (ICCM-19)<\/u>, Montr\u00e9al, Canada, July 28 to August 2, 2013.<\/li>\n
          18. ravey, c., RUIZ, E., TROCHU, F., \u201cRTM optimal injection velocity determination by capillary rise measurements using infrared thermography<\/em>\u201d, 19th<\/sup> International Conference on Composite Materials (ICCM-19)<\/u>, Montr\u00e9al, Canada, July 28 to August 2, 2013.<\/li>\n
          19. Renaud, J., Causse, P., RUIZ, E., TROCHU, F., \u201cA study of consolidation equilibrium in composites made by flexible injection<\/em>\u201d, 19th<\/sup> International Conference on Composite Materials (ICCM-19)<\/u>, Montr\u00e9al, Canada, July 28 to August 2, 2013.<\/li>\n
          20. Causse, P., RUIZ, E., TROCHU, F., \u201cProcessing warpage of asymmetric composite panels manufactured by resin transfer molding<\/em>\u201d, 19th<\/sup> International Conference on Composite Materials (ICCM-19)<\/u>, Montr\u00e9al, Canada, July 28 to August 2, 2013.<\/li>\n
          21. RUIZ, E., \u201cRTM Process Analysis and Simulation of Turbofan Components<\/em>\u201d, JEC Composites Forum<\/u>, Paris, France, March 12-14, 2010.<\/li>\n
          22. RUIZ, E., \u201cSimulation of Resin Transfer Molding Processing of Aircraft Composites<\/em>\u201d, ESI Group Composites Expert Seminar<\/u>, Paris, France, Sept. 26-27, 2012.<\/li>\n
          23. RUIZ, E., \u201cMaterial Characterization For RTM Process Simulation and Optimization<\/em>\u201d, ESI Group Composites Expert Seminar<\/u>, Paris, France, Sept. 26-27, 2012.<\/li>\n
          24. FRANCUCCI, G., V\u00c1ZQUEZ, A., RODR\u00cdGUEZ, E., RUIZ, E., \u201cInfluence of the Type of Fluid and Injection Conditions on the Processing of Natural Fiber Composites<\/em>\u201d, 11th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-11)<\/u>, Auckland, New Zealand, July 9-12, 2012.<\/li>\n
          25. Garc\u00eda J. A., GASCON, Ll., RUIZ, E., LEBEL, F., TROCHU, F., \u201cSimulation and Experimental Validation of the Saturation in LCM Processes<\/em>\u201d, 11th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-11)<\/u>, Auckland, New Zealand, July 9-12, 2012.<\/li>\n
          26. RUIZ, E., LEBEL, F., TROCHU, F., \u201cExperimental Study of Capillary Flows, Voids Formation and Void Migration in LCM Manufacturing<\/em>\u201d, 11th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-11)<\/u>, Auckland, New Zealand, July 9-12, 2012.<\/li>\n
          27. RUIZ, E., \u201cTechnology transfer in Canada: closing the gap between Science and Volume Production<\/em>\u201d, invited speaker at the 11th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-11)<\/u>, Auckland, New Zealand, July 9-12, 2012.<\/li>\n
          28. PINEDA, U. MONT\u00c9S, N., S\u00c1NCHEZ, F., BENSADOUN, F., RUIZ, E., \u201cExperimental Analysis by Thermography and Conductive Heat Flux Sensors of the Curing Stage of Composite Parts made by Resin Infusion (RI)<\/em>\u201d, 15th European Conference on Composite Materials (ECCM-15)<\/u>, Venice, Italy, June 24-28, 2012.<\/li>\n
          29. PINEDA, U. MONT\u00c9S, N., S\u00c1NCHEZ, F., BENSADOUN, F., RUIZ, E., \u201cIn-situ Calibration Experimental Method for Infrared Thermography Applied to the Heat Transfer Analysis for Composite Parts During Manufacturing based on Resin Infusion Technique<\/em>\u201d, 11th<\/sup> Quantitative InfraRed Thermography<\/u>, Naples, Italy, June 11-14, 2012.<\/li>\n
          30. GUTIERREZ, J., TROCHU, F., RUIZ, E., \u201cEffects of High Frequency Vibrations on the Compressibility of Dry Fibrous Reinforcements<\/em>\u201d, 2nd<\/sup> Joint US-Canada Conference on Composites\/26th<\/sup> ASC Annual Technical Conference<\/u>, Montreal, Canada, September 26-28, 2011.<\/li>\n
          31. Causse, P., RUIZ, E., TROCHU, F., \u201cFabrication of Curved Parts by Flexible Injection: Influence of Processing Conditions on Composite Quality and Analysis of Distortion<\/em>\u201d, 2nd<\/sup> Joint US-Canada Conference on Composites\/26th<\/sup> ASC Annual Technical Conference<\/u>, Montreal, Canada, September 26-28, 2011.<\/li>\n
          32. Billotte, C., MORIN BERNARD, F., CARA, F., BAURIER, H., RUIZ, E., \u201cChemical Shrinkage and Thermomechanical Characterization of an Epoxy Resin During Cure by a Novel in Situ Measurement Method<\/em>\u201d, 2nd<\/sup> Joint US-Canada Conference on Composites\/26th<\/sup> ASC Annual Technical Conference<\/u>, Montreal, Canada, September 26-28, 2011.<\/li>\n
          33. Bensadoun, F., Billotte, C., KCHIT, N., BICKERTON, S., TROCHU, F., RUIZ, E., \u201cDevelopment, Characterization and Manufacturing of Nanocomposites and Bionanocomposites for Transportation Industry<\/em>\u201d, 2nd<\/sup> Joint US-Canada Conference on Composites\/26th<\/sup> ASC Annual Technical Conference<\/u>, Montreal, Canada, September 26-28, 2011.<\/li>\n
          34. Causse, P., RUIZ, E., TROCHU, F., \u201cAnalysis of Fiber Preforming for Improved Manufacturing of Curved Parts by Flexible Injection<\/em>\u201d, 18th<\/sup> International Conference on Composite Materials (ICCM-18)<\/u>, Jeju Island, Korea, August 21-26, 2011.<\/li>\n
          35. RUIZ, E., Billotte, C., MORIN BERNARD, F., CARA, F., BAURIER, H., \u201cChemical Shrinkage and Thermomechanical Characterization of an Epoxy Resin During Cure by a Novel in Situ Measurement Method<\/em>\u201d, 18th<\/sup> International Conference on Composite Materials (ICCM-18)<\/u>, Jeju Island, Korea, August 21-26, 2011.<\/li>\n
          36. Fotsing, R., Sola, M., Ross, A., RUIZ, E., \u201cLightweight Damping Treatment of Composite Sandwich Beams<\/em>\u201d, 18th<\/sup> International Congress on Sound and Vibration (ICSV 18)<\/u>, Rio de Janeiro, Brazil, July 10-14, 2011.<\/li>\n
          37. LEBEL, F., RUIZ, E., DULONG, S., TROCHU, F., \u201cDevelopment of a Capillary Characterization Setup for Dual-Scale Analysis of Fiber Wetting<\/em>\u201d, 8th<\/sup> Joint Canada-Japan Workshop on Composites<\/u>, Montr\u00e9al, Canada, July 26-29, 2010.<\/li>\n
          38. Bensadoun, F., KCHIT, N., RUIZ, E., TROCHU, F., \u201cFabrication and Mechanical Properties of Nanocomposites Fabricated by Rein Infusion with Bioresin and Natural Fibers<\/em>\u201d, 8th<\/sup> Joint Canada-Japan Workshop on Composites<\/u>, Montr\u00e9al, Canada, July 26-29, 2010.<\/li>\n
          39. CAUsse, p., RUIZ, E., TROCHU, F., \u201cThermoelastic Spring-in of Curved Composite Parts Manufactured by Flexible Injection<\/em>\u201d, 8th<\/sup> Joint Canada-Japan Workshop on Composites<\/u>, Montr\u00e9al, Canada, July 26-29, 2010.<\/li>\n
          40. Arbter, J.M. Beraud, C. Binetruy, L. Bizet, J. Br\u00e9ard, S. Comas-Cardona, C. Demaria, A. Endruweit, P. Ermanni, F. Gommer, S. Hasanovic, P. Henrat, F. Klunker, B. Laine, S. Lavanchy, S.V. Lomov, A. Long, V. Michaud, G. Morren, E. Ruiz, H. Sol, F. Trochu, B. Verleye, M. Wietgrefe, W. Wui, G. Ziegmann, \u201cExperimental determination of the permeability of textiles: A benchmark exercise<\/em>\u201d, 10th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-10)<\/u>, Monte Verit\u00e0, Ascona, Switzerland, July 11-15, 2010.<\/li>\n
          41. CAUsse, p., RUIZ, E., TROCHU, F., \u201cExperimental Analysis of Flexible Injection for Curved Composite Parts<\/em>\u201d, 10th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-10)<\/u>, Monte Verit\u00e0, Ascona, Switzerland, July 11-15, 2010.<\/li>\n
          42. Kchit, N., Bensadoun, F., Carrozani, T., Billotte,, RUIZ, E., TROCHU, F., \u201cA Study of Nano-Clay Composites made by Liquid Composite Molding<\/em>\u201d, 10th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-10)<\/u>, Monte Verit\u00e0, Ascona, Switzerland, July 11-15, 2010.<\/li>\n
          43. TRUDEAU, P., RUIZ, E., \u201cOptimizing the Fibre Wetting in a Novel Polyurethane Foam Sandwich Composite<\/em>\u201d, 10th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-10)<\/u>, Monte Verit\u00e0, Ascona, Switzerland, July 11-15, 2010.<\/li>\n
          44. FRANCUCCI, G., V\u00c1ZQUEZ, A., RODR\u00cdGUEZ, E., RUIZ, E., \u201cCapillarity Effect in Vacuum Assisted Resin Transfer Molding with Natural Fibers<\/em>\u201d, 10th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-10)<\/u>, Monte Verit\u00e0, Ascona, Switzerland, July 11-15, 2010.<\/li>\n
          45. GASCON, Ll., Garc\u00eda J. A., CHINESTA, F., RUIZ, E., TROCHU, F., \u201cAnalysis of the Saturation in Liquid Composite Molding Process using an Essentially Non-Oscillatory Technique\u201d, 10th International Conference on Flow Processes in Composite Materials (FPCM-10), Monte Verit\u00e0, Ascona, Switzerland, July 11-15, 2010.<\/li>\n
          46. RUIZ, E., DEMARIA, C., TROCHU, F., DAMBRINE, B., GODON, T., \u201cSimulation Of Resin Transfer Molding Processing of a Composite Fan Blade For An Aircraft Engine\u201d, keynote speaker at the 10th International Conference on Flow Processes in Composite Materials (FPCM-10), Monte Verit\u00e0, Ascona, Switzerland, July 11-15, 2010.<\/li>\n
          47. RUIZ, E., ACHIM, V., LEBEL, F., \u201cCharacterization, Analysis and Design of RTM Process\u201d, 10th International Conference on Flow Processes in Composite Materials (FPCM-10), Monte Verit\u00e0, Ascona, Switzerland, July 11-15, 2010.<\/li>\n
          48. KCHIT, N., BENSADOUN, F., Billotte, C., RUIZ, E., TROCHU, F., \u201cNano-clay composites made by liquid molding\u201d, 10th International Conference on Flow Processes in Composite Materials (FPCM-10), Monte Verit\u00e0, Ascona, Switzerland, July 11-15, 2010.<\/li>\n
          49. TRUDEAU, P., RUIZ, E., TROCHU, F., \u201cPolyurethane Composite Sandwich Structure\u201d, 10th International Conference on Flow Processes in Composite Materials (FPCM-10), Monte Verit\u00e0, Ascona, Switzerland, July 11-15, 2010.<\/li>\n
          50. LEBEL, F., RUIZ, E., DULONG, S., TROCHU, F., \u201cCharacterization of Capillary Effects in Dual-Scale Fibrous Reinforcements\u201d, 10th International Conference on Flow Processes in Composite Materials (FPCM-10), Monte Verit\u00e0, Ascona, Switzerland, July 11-15, 2010.<\/li>\n
          51. DEMARIA, C., RUIZ, E., TROCHU, F., DAMBRINE, B., GODON, T., \u201cFabrication by Resin Transfer Molding of a Turbine Blade Reinforced by Three-Dimensional Woven Fabrics: Process Simulation and Optimization\u201d, SAMPE Conference, Seattle (Washington), USA, May 18-20, 2010.<\/li>\n
          52. RUIZ, E., DEMARIA, C., TROCHU, F., DAMBRINE, B., GODON, T., \u201cAdvanced Process Simulation of Resin Transfer Molding and Application to Fan Blades for an Aircraft Engine\u201d, Forum of the Journ\u00e9es Europ\u00e9ennes des Composites (JEC), Paris, France, April 13-15, 2010.<\/li>\n
          53. TROCHU, F., DEMARIA, C., RUIZ, E., DAMBRINE, B., GODON, T., \u201cRTM Process Simulation and Optimization of Composite Fan Blades Reinforced by 3D Woven Fabrics\u201d, Joint American Society for Composites\/ Association for Composite Structures and Materials Conference (ASC\/CACSMA), Newark (Delaware), USA, 15-17 September, 2009.<\/li>\n
          54. LEBEL, F., RUIZ, E., DULONG, S., TROCHU, F., \u201cExperimental Investigation of Dual-Scale Reinforcement Imbibition\u201d, Joint American Society for Composites\/ Association for Composite Structures and Materials Conference (ASC\/CACSMA), Newark (Delaware), USA, 15-17 September, 2009.<\/li>\n
          55. RUIZ, E., ACHIM, V., \u201cRTM process analysis and on-line characterization<\/em>\u201d, 17th<\/sup> International Conference on Composite Materials (ICCM-17)<\/u>, Edinburgh, UK, July 27-30, 2009.<\/li>\n
          56. Sola, M., Jett\u00e9, M.-A., Fotsing, R., Cimmino, M., Ross, A., RUIZ, E., \u201cAnalytical and Experimental Study of Embedded Damping Elements in Composite Applications<\/em>\u201d, 16th<\/sup> International Congress on Sound and Vibration (ICSV 16)<\/u>, Krakow, Poland, July 5-9, 2009.<\/li>\n
          57. Garc\u00eda J. A., GASCON, Ll., CHINESTA, F., RUIZ, E., TROCHU, F., \u201cAn approach to simulate the saturation in RTM\/VARI process<\/em>\u201d, 3rd<\/sup> Manufacturing Engineering Society International Conference (MESIC-09)<\/u>, Alcoy, Spain, Jun 17-19, 2009.<\/li>\n
          58. CHATEL, S., RUIZ, E., TROCHU, F., BREARD, J., \u201cA Permeability Measurement Method Dedicated to a Composite Process Family<\/em>\u201d, 9th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-9)<\/u>, Montreal, Canada, July 8-10, 2008.<\/li>\n
          59. Harismendy I., Del R\u00edo M., RUIZ, E., Garc\u00eda J. A., \u201cModelling VARTM of Wind Turbine Blades under Non-Isothermal Boundary Conditions<\/em>\u201d, 9th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-9)<\/u>, Montreal, Canada, July 8-10, 2008.<\/li>\n
          60. RUIZ, E., TROCHU, F., \u201cFlexible Injection: A Novel LCM Technology for Low Cost Manufacturing of High Performance Composites. Part I:Experimental Investigation<\/em>\u201d, 9th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-9)<\/u>, Montreal, Canada, July 8-10, 2008.<\/li>\n
          61. Daqoune, T., RUIZ, E., TROCHU, F., \u201cStudy of the Shape of the Compaction Chamber in Flexible Injection<\/em>\u201d, 9th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-9)<\/u>, Montreal, Canada, July 8-10, 2008.<\/li>\n
          62. Causse, P., RUIZ, E., TROCHU, F., \u201cConsolidation of Curved Composite Parts Manufactured by Flexible Injection<\/em>\u201d, 9th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-9)<\/u>, Montreal, Canada, July 8-10, 2008.<\/li>\n
          63. LEBEL, F., RUIZ, E., TROCHU, F., \u201cThermosetting Matrix Composite Characterization and Cure Control Via a Scale Model Mould<\/em>\u201d, 9th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-9)<\/u>, Montreal, Canada, July 8-10, 2008.<\/li>\n
          64. DEMARIA, C., RUIZ, E., TROCHU, F., \u201cIn-Plane Anisotropic Permeability Characterization of Deformed Woven Fabrics by Unidirectional Injection<\/em>\u201d, 9th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-9)<\/u>, Montreal, Canada, July 8-10, 2008.<\/li>\n
          65. ACHIM, V., RUIZ, E., \u201cGuiding Selection toward Cost-Effective Composite Manufacturing<\/em>\u201d, 9th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-9)<\/u>, Montreal, Canada, July 8-10, 2008.<\/li>\n
          66. Ortega, I., RUIZ, E., \u201cDispersion and Dielectric Characterization of an Epoxy Resin Reinforced with Carbon Nanofibers<\/em>\u201d, 9th<\/sup> International Conference on Flow Processes in Composite Materials (FPCM-9)<\/u>, Montreal, Canada, July 8-10, 2008.<\/li>\n
          67. RUIZ, E., Ortega, I., Abdellaoui, C., Trudeau, P., \u201cNanosilica-Modified Carbon\/Epoxy Composites Manufacturing and Characterization<\/em>\u201d, 4th<\/sup> International Symposium on Polymer Nanocomposites Science and Technology<\/u>, Boucherville, Quebec, Canada, October 17-19, 2007.<\/li>\n
          68. Ortega, I., Billotte, C., RUIZ, E., \u201cThermo-Mechanical and Rheological Characterization of Various Epoxy-Based Nanocomposites for High Performance Composites<\/em>\u201d, 4th<\/sup> International Symposium on Polymer Nanocomposites Science and Technology<\/u>, Boucherville, Quebec, Canada, October 17-19, 2007.<\/li>\n
          69. Leclerc, J.-S., Meunier, P., RUIZ, E., \u201cImpact of Injection Pressure on Voids Formation and on Mechanical Properties of RTM Composites<\/em>\u201d, 19th<\/sup> Canadian Materials Science Conference<\/u>, Hamilton, Canada, Jun 20-22, 2007.<\/li>\n
          70. Croteau-Labouly, B., ACHIM, V., RUIZ, E., TROCHU, F., GAUVIN, R., \u201cAnalysis of Permeability and Compaction of Fiber Reinforcement During Vacuum Assisted Resin Infusion<\/em>\u201d, 8th<\/sup> Seminar on Experimental Techniques and Design in Composite Materials (ETDCM8)<\/u>, Costa Rel, Italy, October 3-6, 2007.<\/li>\n
          71. Croteau-Labouly, B., ACHIM, V., RUIZ, E., TROCHU, F., \u201cCombined characterization of permeability and compaction in porous media during vacuum assisted resin infusion<\/em>\u201d, The sixth Canadian International Composites Conference CANCOM<\/u>, Winnipeg, Canada, August 15-17, 2007.<\/li>\n
          72. RUIZ, E., ACHIM, V., BREARD, J., CHATEL, S., TROCHU, F., \u201cA Fast Numerical Approach to Reduce Void Formation in Liquid Composite Molding<\/em>\u201d, 8 International Conference on Flow Processes in Composite Materials<\/u>, Mines de Douai, France, July 11-13, 2006.<\/li>\n
          73. RUIZ, E., WAFFO, F., OWENS, J., BILLOTTE, C., TROCHU, F., \u201cModeling of Resin Cure Kinetics for Molding Cycle Optimization<\/em>\u201d, 8 International Conference on Flow Processes in Composite Materials<\/u>, Mines de Douai, France, July 11-13, 2006.<\/li>\n
          74. RUIZ, E., CHATEL, S., TROCHU, F., \u201cA Simplified Numerical Approach to Simulate Resin Transfer Molding with a Dispersion Medium<\/em>\u201d, 8 International Conference on Flow Processes in Composite Materials<\/u>, Mines de Douai, France, July 11-13, 2006.<\/li>\n
          75. HUBERT, P., Haider, M., LESSARD, L., RUIZ, E., TROCHU, F., \u201cIntegrated Approach for Class A Surface Finish of Automotive Components Manfactured by RTM\u201d<\/em>, 27th<\/sup> International SAMPE Europe Conference<\/u>, Paris, France, 27 to 29 March, 2006.<\/li>\n
          76. Haider, M., RUIZ, E., HUBERT, P., LESSARD, L., \u201cResin Cure Shrinkage and LPA Action Characterization for Class A RTM Processing\u201d<\/em>, Canada Composites International Conf.<\/u>, Vancouver, Canada, August. 16-19, 2005.<\/li>\n
          77. RUIZ, E., ACHIM, V., TROCHU, F., BREARD, J., \u201cReduction of Void Formation in LCM, a Practical Numerical Approach\u201d<\/em>, Canada Composites International Conf.<\/u>, Vancouver, Canada, August. 16-19, 2005.<\/li>\n
          78. RUIZ, E., ACHIM, V., SOUKANE, S., TROCHU, F., BREARD, J., \u201cNumerical optimization of injection flow rate in RTM to minimize micro\/macro voids formation\u201d<\/em>, Journ\u00e9es Scientifiques et Techniques “Mise en Forme des Mat\u00e9riaux Composites”<\/u>, Le Havre, France, Dec. 2-3, 2004.<\/li>\n
          79. TROCHU, F., RUIZ, E., ACHIM, V., SOUKANE, S., \u201cNew Approaches to Accelerate Calculations and Improve Accuracy of Numerical Simulations in Liquid Composite Molding\u201d<\/em>, International Conference on Flow Processes in Composite Materials<\/u>, Delaware, USA, July 7-9, 2004.<\/li>\n
          80. RUIZ, E., TROCHU, F., \u201cMulti-Criteria Thermal Optimization by Evolutionary Algorithms of Resin Cure, Processing Stresses and Cycle Time in liquid composite Molding\u201d<\/em>, International Conference on Flow Processes in Composite Materials<\/u>, Delaware, USA, July 7-9, 2004.<\/li>\n
          81. TROCHU, F., RUIZ, E., \u201cApproximation of Resin Flow in Liquid Composite Molding using a New Non-Conforming Three-Dimensional Finite Element\u201d<\/em>, 5th <\/sup>Canada-Japan Workshop on Composites<\/u>, Yonezawa, Japan, September 6-8, 2004, 116-124.<\/li>\n
          82. RUIZ, E., GAUVIN, R., TROCHU, F., \u201cProcessing Stresses and Thermal Optimization in Resin Transfer Molding\u201d<\/em>, 5th<\/sup> Canada-Japan Workshop on Composites<\/u>, Yonezawa, Japan, September 6-8, 2004.<\/li>\n
          83. ACHIM, V., RUIZ, E., SOUKANE, S., TROCHU, F., \u201cOptimization of flow rate in resin transfer molding (RTM)\u201d<\/em>, 8th<\/sup> Japan International SAMPE Symposium and Exhibition (JISSE-8)<\/u>, Tokyo, Japan, November 18-21, 2003.<\/li>\n
          84. RUIZ, E., TROCHU, F., GAUVIN, R., \u201cThermal optimization of thick composite parts manufactured by resin transfer molding\u201d<\/em>, 5th<\/sup> International Symposium on Advanced Composites COMP\u201903<\/u>, Corfu, Greece, November 18-21, 2003.<\/li>\n
          85. RUIZ, E., TROCHU, F., \u201cThermal residual stress during the curing of composite parts manufactured by RTM\u201d<\/em>, International Conference on Sci. and Technology of Composite Materials COMAT\u201901<\/u>, Mar del Plata, Argentine, December 10-12, 2001.<\/li>\n
          86. RUIZ, E., TROCHU, F., \u201cThermal optimization of thick composite parts manufactured by resin transfer molding\u201d<\/em>, Third Canadian International Composites Conference CANCOM-2001<\/u>, Montr\u00e9al, Canada, August 21-24, 2001.<\/li>\n
          87. B\u00e9chet, E., RUIZ, E., TROCHU, F., Cuilli\u00e8RE, J.-C., \u201cRemeshing algorithms applied to resin transfer moulding simulations\u201d<\/em>, Third Canadian International Composites Conference CANCOM-2001<\/u>, Montr\u00e9al, Canada, August 21-24, 2001.<\/li>\n
          88. TROCHU, F., Remacle, J.-F., Br\u00e9ard, J., B\u00e9noit, Y., RUIZ, E., \u201cThree dimensional resin transfer molding simulations: Control of the accuracy and industrial validation for complex ribbed parts\u201d<\/em>, 3th Joint Canada-Japan Workshop on Composites Design and Manufacturing<\/u>, Kyoto, Japan, October 20-23, 2000.<\/li>\n<\/ol>\n

            \n

            \n

             <\/p>\n

             <\/p>\n","protected":false},"excerpt":{"rendered":"

            RESEARCH CONTRIBUTIONS \u00a0 Books: \u00a0 \u201cComposite reinforcements for optimum performance\u201d, Edited by […]<\/p>\n","protected":false},"author":2,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-1031","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/a2c2.meca.polymtl.ca\/index.php?rest_route=\/wp\/v2\/pages\/1031","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/a2c2.meca.polymtl.ca\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/a2c2.meca.polymtl.ca\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/a2c2.meca.polymtl.ca\/index.php?rest_route=\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/a2c2.meca.polymtl.ca\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1031"}],"version-history":[{"count":3,"href":"https:\/\/a2c2.meca.polymtl.ca\/index.php?rest_route=\/wp\/v2\/pages\/1031\/revisions"}],"predecessor-version":[{"id":1061,"href":"https:\/\/a2c2.meca.polymtl.ca\/index.php?rest_route=\/wp\/v2\/pages\/1031\/revisions\/1061"}],"wp:attachment":[{"href":"https:\/\/a2c2.meca.polymtl.ca\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1031"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}